Aqua Master Digital Monitor P700 Pro

Size:

uniwersalny

Producer: Aqua Masters

Add to wish list Compare

~~233,28 EUR~~

198,29 EUR

/ szt.

You save 15% (34,99 EUR).

Easy product returns

Buy a product and check it in your own time, at home.
You can return the product without providing a reason within 14 days.

Show details

14 days for a return

Your satisfaction is very important to us, therefore you can make a return without providing a reason within 14 days.

No stress and worry

Thanks to the integration with cheap returns you can purchase without stress and be sure that the return process will be hassle free.

Easy returns wizard

All returns processed by our shop are managed in a easy-to-use returns wizard which gives you the ability to send a return parcel.

Aqua Masters P700 PRO Manual Download

Domeniu de măsurare
pH 0.0 ~ 14.0 pH
Temperature: 0 °C ~ 50 °C (32 °F ~ 122 °F)
EC: 0 ~ 1999 us/cm
EC: 0.0 ~ 19.9 ms/cm
TDS: 0 ~ 19990 ppm
TDS: 0.00 ~ 19.99 ppt
Acuratețe
pH: ±0.1pH
EC: ±2%F.S
pH, EC, PPM, TDS, US, Temp
95x61x20 mm
500g

The P700 Pro is a digital monitor that ensures fast and accurate measurements. The meter is especially suitable for measuring pH, EC, PPM, CF, and temperature values in liquid plant foods and water ponds. Optimal pH, EC, PPM, CF, and temperature values are crucial for your plants’ growth.

The meter has a large display where you can read all values. The electrodes are easy to replace in case they are worn or broken. The buttons allow you to switch between parameters. A rechargeable battery is included, so even when you have no access to power, you will still be able to use the monitor and do not need to purchase batteries.

It is possible to keep the electrodes in the liquid continuously to constantly measure the values. However, this means that the electrodes need to be calibrated more frequently.

Usage

Simply plug the AC adapter into a power outlet and the USB connector into the monitor.
Connect the pH electrode to the probe inset of the instrument.
Remove the pH and EC electrodes’ protective cover.
Turn on the meter.
Immerse the pH and EC electrodes in the fluid you want to test and stir gently until the reading stabilizes.
Press the C/F key, to switch between Celsius and Fahrenheit.
Press the MODE key to cycle through EC, CF, and PPM measurements.
Turn off the meter after use.
Rinse the pH and EC electrodes using tap water to minimize contamination.
Replace the EC electrode’s protective cover.
Fill the pH electrode’s protective cover with a storage solution and replace the cover.
You can also use the meter continuously by leaving the electrodes in the fluid you want to test.
Please note that when the meter is used continuously, it will require calibration regularly. It is also important to regularly check for algae infestation and to carefully clean the electrodes when needed.