Easy product returns
- Type of product: Power contactor module
- To be used in combination with the Gavita Master Controller EL-1 / EL-2
Technical specifications
|
Input voltage |
240 Volt AC ±10% |
|
Input frequency |
50-60 Hz |
|
Maximum allowable voltage |
240 Volt AC |
|
Maximum allowable current (AC1) |
16 Amp |
|
Maximumallowable power (AC3) |
1,5 kW |
|
Maximum signal cable length |
<65ft / <20m |
|
Ambient temperature |
0 - 35°C |
|
Relative humidity |
< 70% (bez kondensacji) |
|
Input cable |
EU CEE 7, cable 1,3ft / 40cm with 240V plug |
|
Dim control connection |
Cage clamps, signal cable 3m |
|
Dimensions |
170mm (length) x 150mm (width) x 80mm (height) |
|
weight |
0,5 kg |
Features and Benefits
-
Easy installation
-
Status signaling
-
Switch auxiliary equipment up to 16Amp
Information
For the Master Controller, Gavita has developed an external contactor module, ECM1.
Because the Master Controller operates on a low output voltage, it is therefore unable to switch auxiliary devices.
With the ECM1 you can extend the functionality of your Master Controller to switch auxiliary devices such as heaters, dehumidifiers and CO2 equipment when turning the light on or off according to the hours set on the Master Controller.
Mount it next to the device you want to control and simply connect the control cable to the ECM1 and Master Controller El-1 / EL-2 or EL1F / EL2F.
The ECM1 has an LED status indicator. Which shows when the device is turned on / off.
Switch on and off auxiliary devices up to 16 amps with a high-quality contactor.
