CO2 Emergency Stop Station (DSE-1)

Size:

uniwersalny

Producer: Trolmaster

Add to wish list Compare

~~106,00 EUR~~

90,10 EUR

/ szt.

You save 15% (15,90 EUR).

Easy product returns

Buy a product and check it in your own time, at home.
You can return the product without providing a reason within 14 days.

Show details

14 days for a return

Your satisfaction is very important to us, therefore you can make a return without providing a reason within 14 days.

No stress and worry

Thanks to the integration with cheap returns you can purchase without stress and be sure that the return process will be hassle free.

Easy returns wizard

All returns processed by our shop are managed in a easy-to-use returns wizard which gives you the ability to send a return parcel.

Input Voltage: 100~240 VAC, 50/60Hz
Output Current: 10A
Output Voltage: 100~240 VAC, 50/60Hz
Working Environments: Temperature 32-122°F, Humidity

The DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 120V controlled outlet that supplies the power to CO2 solenoid valves in normal operation . The Carbon-X will then automatically shut off DSE-1 power if any fault or high CO2 level is detected within any of the installed CO2 sensors. If the DSE-1 loses communication with the Carbon-X, the power supply will also be disabled.

_{LED status:
* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.
* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.}

Package Content:

1 x Emergency Stop Device Station

1 x 16ft RJ12 Cable

1 x 4ft RJ12 Cable

1 x RJ12 T-Splitter

Specification:

Input Voltage: 100~240 VAC, 50/60Hz

Output Current: 10A

Output Voltage: 100~240 VAC, 50/60Hz

Working Environments: Temperature 32-122°F, Humidity<=90%

Package Dimensions: 85mm(L) x 80mm(W) x 90mm(H)

G.W. per pack: 0.34kgs