Bluelab
( anzahl der Produkte: 46 )
- pH-7 fluid for calibration of BlueLab electronic pH meters.
- pH-4 fluid for calibration of BlueLab electronic pH meters.
- 2.77EC fluid for calibration of BlueLab electronic EC meters.
- Protects the electrodes after the measurement and calibration are completed.
- 2.77EC fluid for calibration of BlueLab electronic EC meters.
- pH-4 fluid for calibration of BlueLab electronic pH meters.
- pH-7 fluid for calibration of BlueLab electronic pH meters.
- 2.77EC fluid for calibration of BlueLab electronic EC meters.
- pH-4 fluid for calibration of BlueLab electronic pH meters.
- pH-7 fluid for calibration of BlueLab electronic pH meters.
- Protects the electrodes after the measurement and calibration are completed.
- Probe care instructions
- Two 18 ml single-use sachets of Bluelab 2.77 EC Conductivity Standard Solution
- One plastic cup
- Bluelab Conductivity Probe Cleaner
- Chamois for cleaning your conductivity probe
- Packaging may vary
- Probe care instructions
- 18 ml single-use Bluelab Solution Sachets - two each of: pH 7.0, pH 4.0 and KCl solutions
- Three plastic cups
- Bluelab pH Probe Cleaner
- Toothbrush for cleaning your pH probe
- Packaging may vary
- Protects the electrodes after the measurement and calibration are completed.
- The Secure Measurement Equipment Bag from BlueLab
- 18 ml single-use Solution Sachets - two each of: pH7.0, pH4.0, KCl and2.77 EC standard solution
- Three plastic cups
- pH Probe Cleaner
- Conductivity Probe Cleaner
- Toothbrush for cleaning your pH probe
- Chamois for cleaning your conductivity probe
- Power supply with international adapters
- The set contains
- 10 sachets pH4 18ml,
- 10 sachets pH7 18ml,
- 5 sachets 2.77EC 18ml
- 5 sachets KCL 18ml
- Built-in alarm that can be turned off if required
- External alarm (horn or flashing light) can be connected
- External lock sensor can be connected to stop all control and dosing
- Compatible with Bluelab ® Pro Controller ™
- Easy to clean
- Waterproof cable
- Single knot
- Durable plastic barrel
- Gel filled (non-refillable)
- Easy to clean
- Waterproof cable
- Single knot
- Durable plastic barrel
- Gel filled (non-refillable)
- EC and Temperature Operation
- Backlit LCD Display
- Low Battery Indicator
- Fully Waterproof
- 1 x AAA Alkaline Battery Included
- Length: 40.7 cm
- Measuring range: EC ( 0.2 - 3.6 ), CF ( 2-36 )
- Fully waterproof!
- No calibration required!
- Automatic on and off.
- No external switches!
- Length: 40.7 cm
- Measuring range: EC ( 0.2 - 3.6 ), CF ( 2-36 )
- Fully waterproof!
- No calibration required!
- Automatic on and off.
- No external switches!
- Selectable temperature unit
- Backlit LCD display
- PH calibration indicator - Successful
- Fully waterproof
- 1 x AAA alkaline battery included
- Length: 40.7 cm
- Measuring range: EC ( 0.4 - 6.0 ), CF ( 4-60 )
- Fully waterproof!
- No calibration required!
- Automatic on and off.
- No external switches!
- Bluelab Connect Range Extender is necessary if you need to increase the signal range for wireless monitoring of your crop.
- Easy to clean
- Waterproof cable
- Single knot
- Durable plastic barrel
- Gel filled (non-refillable)
- Digger/Auger included
- 2 meter standard cable
- 6 month warranty on electrodes.
- 24/7 connection to facilities and crops
- Easy device management in Bluelab Connect software
- Local data logging with cloud data logging backup
- Remote monitoring through the Bluelab Connect mobile application.
- Automatic temperature compensation: Yes
- Operating environment: 0 - 50 °C, 32 - 122 °F
- Power supply: 1 x AAA alkaline battery (included)
- Electrode warranty: 6 months.
- Measurement range: 0.0 - 14.0 pH 0 - 50 °C, 32 - 122 °F
- 2m cable for hard-to-reach locations
- Fully waterproof
- Effective in solutions of 0.2 EC and above
- Dual junction probe reduces contamination, extending service life
- The Bluelab Sample Tube is a specialized accessory that enables easy sampling and analysis of nutrient solutions.
- Light and portable
- Large, easy-to-read display
- pH - 4.0, pH - 7.0.
- Backlit LCD display
- Replaceable pH Leap electrode included
- Lightweight and portable
- Large, easy-to-read display
- No EC or temperature calibration required
- Low battery indicator
- 2 AAA alkaline batteries included
- Automatic function included
- pH
- Control parameters: pH - single choice
- direction (up or down)
- Adjustment range: 0.1 - 13.9 pH
- Dosage rate: 10 ml per minute
- Accuracy: 0.1 pH
- Measures conductivity - EC, humidity and temperature,
- Probe length: 200 mm,
- Probe separation: 50 mm,
- Active probe tip length: 50 mm,
- Minimum pot size 2 liters,
- Power source: 1 x AA alkaline battery.
- Lightweight and portable
- Large, easy-to-read display
- No EC or temperature calibration required
- Low battery indicator
- 2 AAA alkaline batteries included
- Automatic function included
- pH measurement range: 0.0 - 14.0 pH 0 - 50 °C,
- resolution: 0.1 pH 1 °C,
- calibration: factory calibrated,
- operating environment: 0 - 50 °C.
- Adjustment range: 0.1 - 13.9 pH
- Accuracy: 0.1 pH
- Operating environment: 0 - 50 °C
- Temperature compensation: YES
- Operating environment: 0 - 50 °C
- pH measurement range: 0.0 - 14.0 pH 0 - 50 °C,
- resolution: 0.1 pH 1 °C,
- calibration: factory calibrated,
- operating environment: 0 - 50 °C.
- 120ml/min pump flow rate.
- 2x 4 meters/13 feet of food-grade tubing for dosing nutrient stock solution.
- 4 meters/13 feet of tubing for dosing pH adjuster solution.
- Respond quickly to plant needs.
- Troubleshoot and optimize for successful cultivation.
- Integrated automation for greater profits.
- Full control of pH, conductivity and temperature in one device.
- Reinforced wall construction.
- Individual pump priming and calibration.
- Interchangeable peristaltic pumps and tubing.
- 3 x 4 meters of food grade pipe for dosing the stock solution.
- Built-in Wi-Fi (can be turned off)
- Overdosing protection
- View and control via mobile phone,
- Cable length 2m.
- 24/7 pH, EC and tank temperature control
- Built-in Wi-Fi (can be disabled)
- View and control via mobile phone
- 2m cable length
- Automatic resumption of dosing after power loss
- Replaceable pH probe (BNC connection), temperature and conductivity measurement
- Reinforced wall construction.
- Individual pump priming and calibration.
- Interchangeable peristaltic pumps and tubing.
- 3 x 4 meters of food grade pipe for dosing the stock solution.
